Electrical FAQ straight answers
Answers to common questions about our services, licensing, service area, panel upgrades, EV chargers, lighting and electrical problems.
About Hernandez Powers & Lighting
Is Hernandez Powers & Lighting a licensed electrician?
Yes. Hernandez Powers & Lighting is a licensed, bonded and insured electrical contractor in California, CA Contractor License #1163274. You can verify the license on the California Contractors State License Board (CSLB) website.
What areas do you serve?
We serve San Bernardino County, Riverside County and Los Angeles County, including Ontario, Rancho Cucamonga, Upland, Montclair, Chino, Chino Hills, Fontana, Riverside, Jurupa Valley, Eastvale, Pomona and Claremont.
Do you do residential and commercial work?
Yes. We handle both residential and commercial electrical projects, from repairs and lighting to panel upgrades, EV chargers, whole-house generators, remodels and new construction.
Do you offer free estimates?
Yes. Estimates are free. Call or text 909-663-6699 and tell us about your project. We are available 7 days a week, 5 AM to 7 PM.
How do I get an estimate?
Call or text 909-663-6699, email hernandezpowers89@gmail.com, or use the estimate request form on our contact page. Tell us your city, the type of project and a few details, and we will follow up to talk through the job.
Can I text you photos of the problem or project?
Yes. Texting photos to 909-663-6699 is one of the fastest ways to show us what you are working with, such as your panel, a problem outlet or the space you want lit.
Residential Electrical
What residential electrical work do you do?
Hernandez Powers & Lighting handles most residential electrical work, including outlets and switches, new circuits, lighting and ceiling fans, panel upgrades, EV charger installation, remodel wiring, code corrections and troubleshooting. If you have a project that isn't listed, call or text 909-663-6699 to ask.
Should I hire a licensed electrician for small jobs?
Yes. In California, a CSLB-licensed contractor is required for any job of $1,000 or more (labor and materials combined) and for any job that needs a permit, whatever the price. Even small electrical jobs can create shock or fire hazards if done incorrectly. Hernandez Powers & Lighting is licensed under CA License #1163274.
Do you work on older homes?
Yes. Many homes in Ontario, Upland, Pomona, Claremont and Riverside have older wiring or panels. We can evaluate what you have and recommend updates or code corrections where they make sense.
Commercial Electrical
Do you work on commercial properties?
Yes. Hernandez Powers & Lighting provides commercial electrical services including tenant improvements, equipment circuits, lighting upgrades, panel work, troubleshooting and code corrections for businesses in San Bernardino, Riverside and Los Angeles counties.
Can you upgrade our business to LED lighting?
Yes. We install and upgrade interior and exterior commercial lighting, including LED fixtures, parking lot lights and security lighting. Call or text 909-663-6699 to discuss your space.
Can you fix items on an inspection or correction notice?
Yes. Send the list of electrical items from your inspection report and we will review what is needed and provide an estimate.
Panel Upgrades
How do I know if I need a panel upgrade?
Common signs include breakers that trip often, no free spaces for new circuits, lights dimming when appliances start, a panel that is warm or buzzing, or plans to add an EV charger, heat pump, spa or major remodel. A licensed electrician can do a load evaluation to confirm.
Do I need a panel upgrade to install an EV charger?
Not always. It depends on your panel's size, available space and the load your home already uses. Many homes can add a Level 2 charger without an upgrade; others need more capacity. Hernandez Powers & Lighting can evaluate your panel and tell you which applies.
Does a panel upgrade require a permit?
In California, panel and service upgrades generally require a permit from your city or county, and service changes often involve coordination with your electric utility, such as Southern California Edison or Riverside Public Utilities. We can walk you through what your job requires.
EV Charger Installation
What kind of EV charger should I install at home?
Most EV owners choose a Level 2 charger on a 240-volt circuit, either hardwired to the wall or plugged into a 240V outlet such as a NEMA 14-50. The right amperage depends on your vehicle and your panel's available capacity.
Can you install a Tesla Wall Connector?
Yes. We install Tesla Wall Connectors and universal Level 2 chargers for other brands, including Ford, Chevrolet, Hyundai, Kia, Rivian and more.
How long does EV charger installation take?
Many straightforward garage installations are completed in a single visit. Longer wire runs, outdoor installs or panel upgrades can add time. We will give you a clear estimate after talking through your setup.
Lighting & Ceiling Fans
Can you install recessed lighting in an existing ceiling?
Yes. Recessed and LED wafer lights can usually be added to existing ceilings without major demolition. We plan the layout and wiring for even, comfortable light.
Can you install a ceiling fan where there is only a light fixture?
Usually, yes. Ceiling fans need a fan-rated box and proper support. We replace the box if needed and can add separate controls for the fan and light.
Do you install outdoor and landscape lighting?
Yes. We install porch, patio, landscape, pathway, security and motion lighting for homes and businesses throughout San Bernardino, Riverside and Los Angeles counties.
Troubleshooting & Repairs
Why does my breaker keep tripping?
A breaker usually trips because the circuit is overloaded, there is a short circuit, or there is a ground fault. It can also be caused by a failing breaker or a loose connection. If a breaker trips repeatedly, stop resetting it and have a licensed electrician find the cause.
Why did some outlets in my house stop working?
Often a GFCI outlet elsewhere on the circuit has tripped, which cuts power to outlets downstream of it. Check and reset GFCI outlets in kitchens, bathrooms, garages and outdoors. If that does not restore power, there may be a loose connection or failed device that an electrician should inspect.
What should I do if I smell burning from an outlet or panel?
If it is safe to do so, turn off the breaker for that circuit and stop using the outlet. If you see smoke, flames or sparking, leave the building and call 911. Then have a licensed electrician inspect the circuit before using it again.
Can you fix items from a home inspection report?
Yes. Send us the electrical items from your inspection report and we will review them and provide an estimate for the corrections.
New Construction & Remodels
Do you work with general contractors?
Yes. Hernandez Powers & Lighting works directly with homeowners and as the electrical contractor for builders and general contractors on new construction, remodels and additions.
Can you wire an ADU or garage conversion?
Yes. ADUs and garage conversions often need new circuits, lighting, a subpanel or a service upgrade, and sometimes a separate meter. We can plan the electrical to fit your design and local requirements.
When should I bring an electrician into a remodel?
As early as possible. Involving an electrician during planning helps place outlets, lighting and circuits correctly and catches capacity issues before walls are closed.
Generators & Hookups
What is a whole-house standby generator?
A standby generator is permanently installed outside your home, usually running on natural gas or propane. When the power goes out, an automatic transfer switch starts it and switches your home over within seconds, then switches back when utility power returns.
What size generator do I need for my home?
It depends on what you want to run during an outage. Powering essentials like the fridge, lights, internet and a furnace fan takes far less capacity than running the whole house, including central air. We do a load calculation and recommend the right size.
Can I plug my portable generator into a dryer outlet?
No. Backfeeding a house through an outlet with a double-ended cord is dangerous and illegal. It can electrocute you or utility workers on the lines and can start a fire. The safe way is a generator inlet with an interlock kit or a transfer switch, installed by a licensed electrician.
What does an interlock kit do?
An interlock kit mechanically prevents your main breaker and generator breaker from being on at the same time. That keeps generator power from flowing back onto the utility lines while you run your home on a portable generator.
Does a standby generator need a permit?
In most California cities, yes. Standby generators usually need an electrical permit and a gas connection, and placement has to meet setback and noise rules. We can walk you through what your installation requires.
